Little Giant Wastewater Replacement Parts

eSupply Depot carries a wide variety of accessories and replacement parts for all currently manufactured Little Giant pumps, as well as parts for many of their discontinued pumps. Unlike other Distributors and Dealers, eSupply Depot actually stocks thousands of items and normally will ship an order the same day it is received. In addition we have the advantage of being located within just a few miles of the Franklin Electric (Little Giant Pump Company) Distribution Warehouse and can quickly get those unusual parts that may not be stocked and can ship the order within 24 hours.

• 
  Little Giant 513288 HWAB Indoor High Water Alarm

  Indoor High Water Alarm

  The HWAB indoor high water alarm is designed to warn of high water levels in lift chambers, sump basins, holding tanks, sewage and water removal systems. When a potentially threatening liquid level condition occurs, the alarm horn will sound and the alarm light will illuminate. The alarm light will remain illuminated until the condition is remedied. Once the condition is cleared, the alarm will automatically reset. A green “power on” light indicates 120VAC primary power is being applied to the alarm. The alarm is equipped with a 9VDC battery backup to ensure the alarm system continues to function if primary power fails. If battery is low, a low battery chirp feature will cause the horn to chirp approximately once per minute. This indicates that the battery should be replaced.

  NEMA 1 thermoplastic enclosure Mecahnical float switch with 15' cable Alarm has red LED warning light, horn with silence switch and test button 9 VDC battery backup UL/CSA listed Specifications: 995271

  (read more...)
  Price: $145.00

  Quantity

  Add to Cart
• 
  Little Giant 513302 PD-2 Pump disconnect

  Pump Disconnect

  Item Number: 513302

  Model Number: PD-2

  Non guide rail disconnect for use where the discharge is no lower than 18" below grade or where guide rails are not necessary. Point of discharge should be above the liquid level.

  Features:

  • Non guide rail disconnect
  • Point of discharge should be above the liquid level

  • Pump Disconnect

    • Applications
    • When discharge is no lower than 18" (46 cm) below grade or where guide rails are not necessary
    • Features
    • Non guide rail disconnect
    • Point of discharge should be above the liquid level

    Guide Rail Systems

    • Applications
    • For installations with a total depth of over 5' (1.5 m) when the discharge pipe is 18" (46 cm) or more below grade, particularly when the liquid level is above the discharge level*
    • Features
    • 3/4" (19 mm) IPS (iron pipe size) pipe rails should be used on the 1 1/4" (31.7 mm) and 2" (51 mm) system and 1-1/4" (31.7 mm) IPS pipe rail on the 3" (76 mm) system
    • Brass foot guide supplied for use with steel pipe
    • Guide rail brackets and steel stand-off brackets included with each system to support the upper end of the guide rail pipes
    • One intermediate guide rail bracket is required for every 10' (3 m) of rail (guide rail pipes, lifting chain, and pull rod not included)

    Cord Connectors

    • Applications
    • Provides strain relief
    • Features
    • Cord connector is liquid tight
    • Polyamide neoprene gland resist salt water, weak acids/alkalis and other chemicals

    Discharge adapters

    • Applications
    • Allows use of garden hose with utility and sump pumps
    • Features
    • Polypropylene, rust resistant

    Intermediate Guide Rail Brackets

    • Applications
    • For use with guide rail systems

    SA-1 (Sacrificial Anode)

    • Applications
    • Magnesium accessory for use with aluminum-body pumps
    • Features
    • Provides corrosion protection
    • Lead wire

    • Pump Disconnect

      Item No.	Model	Disconnect
      513302	PD-2	2" 51mm

      Guide Rail Systems

      Item No.	Model	Discharge
      513305	GR-3/4-114D	1-1/4" 31.7mm
      513301	GR-3/4	2" 51mm
      513300	GR-1-1/4	3" 76mm

      Cord Connectors

      Item No.	Model	Cord	Wire/Cable (AWG)
      599207	CC-1	.270" to .480" 6.9 mm - 12.2 mm	18/2, 18/3, 18/4, 16/2, 16/3, 16/4, 14/2, 14/3
      599213	CC-3	.545" to .709" 13.8 mm - 18 mm	14/2, 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10/3

      Discharge Adapters

      Items No.	Model	Size
      599030	GH-1 Adapter (fits 5-MSP/ASP)	1" MNPT x 3/4" GHT 2.54 mm x 19 mm
      599025	GH-3/4 Adapter	1-1/4" MNPT x 3/4" GHT 31.7 mm x 19 mm
      599026	AD-6 Adapter (6-pk)	1-1/2" MNPT x 1-1/4" FNPT 38 mm x 31.7 mm

      Intermediate Guide Rail Brackets

      Item No.	Model	Guide Rail
      513303	IGR-3/4	3/4" 19 mm (for use with GR-3/4)
      513304	IGR-1-1/4	1-1/4" 31.75 mm (for use with GR-1-1/4)

      SA-1 (Sacrificial Anode)

      Item No.	Model	Wire
      599002	SA-1	8" 20 cm

      
      
     

  
  

  (read more...)
  Price: $299.00

  Quantity

  Add to Cart
• 
  Little Giant 513450 6" Riser

  (read more...)
  Price: $128.00

  Quantity

  Add to Cart
• 
  Little Giant 513451 12" Riser

  AKP10260 

  (read more...)
  Price: $148.00

  Quantity

  Add to Cart
• 
  Little Giant 513632 PPSFWA Senior Float Assembly with Alarm Hardware

  (read more...)
  Price: $159.00

  Quantity

  Add to Cart
• 
  Little Giant 599014-RS-5LL 115V Low Level Pump, Remote "Piggyback" Diaphragm Switch, 18' Power Cord

  Catalog Number: 599014
  Model Number: RS-5LL
  115V - Low Level, Piggyback Diaphragm Switch, 18' Power Cord
  
  

  Piggyback Diaphragm Switch

  Like RS-5, but activates at a lower water level. "On" level: 2"- 3". "Off" level: .5" - 1.5" when mounted to 5-MSP. For pumps up through 1/3HP.

  Converts any manual pump to automatic operation, up through 1/3 HP UL/CSA listed

  (read more...)
  Price: $99.00

  Quantity

  Add to Cart
• 
  Little Giant 599117 RFSN-9 115/230V 1/2-1 HP - Piggyback Remote (wide Angle) Float Switch, 15' Power Cord

  Catalog Number: 599117
  Model Number: RFSN-9
  115/230V 1/2-1 HP - Piggyback Remote (wide Angle) Float Switch, 15' Power Cord
  
  

  Piggyback Remote Float Switch

  This Remote Float Switch, (aka Wide Angle)is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps. Float switch consists of one float, a cord with piggyback plug, one large mounting strap and two small adjustable mounting clamps.

  Convert any manual pump to an automatic pump, up through 1/2 HP or 1 HP

  
  
• Manual: 994319