Little Giant Water Gardening Products

120 GPH Statuary Fountain Pump
This wet-rotor pump, often referred to as a magnetic-drive pump by other manufacturers, utilizes an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller, and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor, thus the term “wet-rotor”. It is seal-less and oil-less. This pump works well in water garden, statuary, and some industrial applications. It is compact in design and is the most energy efficient type of pump Little Giant manufactures. The other side of this efficiency is very little starting torque. Therefore, the pump does not produce as much pressure and will not pump water as high as its epoxy-encapsulated counterpart.
Built-in flow control

Bottom intake

4-foot maximum lift

Discharge adapters for 1/2" or 3/8" I.D. tubing 

63 GPH Statuary Fountain Pump

Energy efficient

Built-in flow control

63 gallons per hour (GPH)

2.1-foot maximum lift

5 watts

6-foot cord

Discharge accepts 1/2" or 3/8" I.D. tubing

Catalog Number: 523375
Model Number: P-AAA-WG
1/160 HP, 120 GPH - Submersible Pond Pump, 15' Power Cord

Permanently Lubricated Pumps

These pumps utilize plastic or aluminum housings and contain non-toxic dielectric oil, which provides continous lubrication for maximum motor life.

120 GPH @ 1ft. Operates submersed 15' cord Corrosion-resistant housing Impedance protected. Screened inlet 1/4" MNPT outlet, with 90° elbow accessory, accepts 1/2" I.D. tubing.

Spec Sheet	Small Submersible Pumps_OL Spec Sheet_WEB.pdf
Curve	Click to View Curve

Catalog Number: 527300
Model Number: NK-2UL-WG
1/40 HP, 325 GPH - Submersible Pond Pump, 15' Power Cord

Permanently Lubricated Pumps

These pumps utilize plastic or aluminum housings and contain non-toxic dielectric oil, which provides continous lubrication for maximum motor life.

325 GPH @ 1 ft. Operates submersed. 15' cord Corrosion-resistant nylon housing Five position options 1/4" MNPT outlet accepts 1/2" I.D. tubing. Thermally protected. Includes two inlet volutes: original style with snap-off screen, and one with a fitting for connecting pre-filter

... CATALOG NO./MODEL NO. 526003 NK-1 526076 NK-1 527003 NK-2 527016 NK-2 527076 NK-2 527176 NK-2 527180 NK-2 527300 NK-2UL-WG 527380 NK-2UL-FWG ... www.franklin-electric.com/media/documents/993962.pdf - 2010-03-18 - Text Version

Includes Outlet Adapter, Flow Regulator, Foam Pad, Inlet Cap, and Tubing

Fountain install kit includes the following:

Shims
Fittings
5 feet of 1/2" PVC tubing
Grommet

170 GPH Direct-Drive Pond Pump

Epoxy filled pump is compact in design, produces superior water flow and has corrosion resistant plastic housing. Ideal for the water gardening environment.

Ideal for use with fountain nozzles, pond ornaments, filters, and circulating ponds up to 170 gallons Designed to operate continuously with maximum energy efficiency Corrosion resistant body designed for non-potable submersible use 3 year warranty Maximum Pumping Height 7' 1/4" MNPT Discharge Accepts 1/2" ID Tubing

Statuary Fountain Pump, 300 GPH These pumps, commonly referred to as "potted pumps", feature an epoxy encapsulated motor, plastic housing, and radial lip seal on the motor shaft. Ideal for use with statuary fountain pumps, fountain nozzles and pond ornaments Corrosion resistant body designed for non-potable submersible sue Maximum Pumping Height 12.0' Accepts 3/8" or 1/2'' ID Tubing 3 year warranty

300 GPH Direct-Drive Pond Pump

Epoxy filled pump is compact in design, produces superior water flow and has corrosion resistant plastic housing. Ideal for the water gardening environment.

Circulates Ponds up to 400 Gallons, Fountain Nozzles and Biological Filters 3 year warranty Maximum Pumping Height 12.0 1/4" MNPT Discharge Accepts 1/2" ID Tubing

475 GPH Direct-Drive Pond Pump

Epoxy-filled pump is compact in design, produces superior water flow and has corrosion resistant plastic housing. Ideal for the water gardening environment.

Usages: Circulating ponds up to 800 gallons, fountain nozzles, biological filters Corrosion resistant body designed for non-potable submersible use 3 year warranty Maximum Pumping Height 13.0' 1/2" MNPT Discharge Accepts 3/4" ID Tubing

Statuary Fountain Pump, 47 GPH

Mag-Drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanemt magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less.

2' maximum pumping height 3/8, 1/2" barbed discharge Built-in flow control 3 Watts 6' cord 3 Year Warranty Spec Sheet PES Series Pumps_OL Spec Sheet_WEB.pdf Instruction Sheet 998290.pdf Curve Click to View Curve

Statuary Fountain Pump, 80 GPH

Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less.

3.5' maximum pumping height 3/8, 1/2" barbed adaptor Built-in adjustable flow control valve 8 Watts 6' cord 3 Year Warranty Spec Sheet PES Series Pumps_OL Spec Sheet_WEB.pdf Curve Click to View Curve

Multi-Purpose Mag Drive Pump

Magnetic drive pumps are very energy-efficient due to their motor design; this is commonly referred to as "hysteresis" or "synchronous". These pumps have corrosion-resistant housings, making them excellent for water gardening applications.

8' maximum pumping height 3/4" barbed discharge Ceramic shaft for longer life 57 Watts 15' cord 3 Year Warranty

Spec Sheet PES Series Pumps_OL Spec Sheet_WEB.pdf Instruction Sheet 998290.pdf Curve Click to View Curve

l